2 Channel 433MHz Remote Control Switch Transmitter + Receiver for Garage Door
- 3pcs Remote Control Switch Transmitter+Receiver Set for Garage Door
- It has 2 channel relays which can make the equipment turn or reverse, on/off and so on come true
- Each wireless remote control has 2 programmable function keys
- The output way/working way can be changed as you like
- Widely used in auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc
- 100% Brand New
- Key: 2 Keys
- Working frequency: 433MHZ
- Transfers distance: about 50m-100m (in the open space)
- Remote control power supply: 2x 3V CR2016 button battery (Not included)
- Material: ABS
- Size: about 5*3*1.3cm/1.97"x1.18"x0.51"
- Color: As Pictures Show
- Working voltage:DC 12V
- Static current: ≤ 8.5mA
- Working frequency: 433 MHz
- Receiving sensibility: > 97 dBm
- Modulation mode: ASK
- Encode mode: Learning code(1527)
- Decoding mode: MCU software decoding
- Wiring type: Fixed terminal
- Switch output: Normally open & Normally closed
- Working temperature: -30 degree Celsius~80 degree Celsius
Output working way:
1) Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
2) Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
3) Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
4) Delay: Press remote control 's one button, relay is working,release the remote control and begin timekeeping, after 5s/10s/15s will automatically close the relay.
- 1x Receiver
- 1x Shell
- 3x Remote Controllers