WiFi Switch Relay Module DC 5V 12V Self-Locking Wireless Smart Home Automation For APP Control
Open and close your gate using any phone or computer.
Device connects using your home wireless connection (make sure your gate has WIFI reception!).
All gate controls function normally, this device acts as additional control without interfering with other controls.
There is no sensor that reports the status of the gate or its use by other controls or controllers.
Will only work with openers/gates that act as a momentary closure switch
Should work with any gate that has auxiliary or opener blocks to attach to on the control board.
Support For Alexa
Supports WiFi network.
Supports status tracking: home appliances status timely provided to the EweLink.
Supports remotely turn on or off added devices.
Supports Max 8 timing tasks for each added device.
Supports numerous WiFi smart switches on one smart phone.
Easy installation and handling
Can be activated immediately
Acts as a momentary switch for 1 second before toggling back (make sure your gate will open with a 1 second pulse)
Size: about 66x40.5mm(LxW)
Operating Current: 5V DC via USB connector or 710A 125V-250V AC, 28V-30V DC via terminal blocks
LEDs: 3 LEDs which indicate working mode, wifi status, relay on/off status respectively.
Two input interfaces
Board consumption: <1W
Standby current: 80mA
Max input current: 10A
Supports to control different voltage ranges
Relay lifespan: more than one million times
100M electrical insulation resistance
Electric shock voltage: 1000V
Relay maximum pull time: 15ms
Relay maximum release time: 5ms
Operating temperature: 0ºC-40ºC(32°F-104°F)
Operating Humidity: 40% ~ 80% RH
Support App: For iOS or Android app, For EWeLink app (https://www.itead.cc/wiki/EWeLink_Introduction)
Attention: Only compatible with 2.4GHz wireless networks.
Package included:1x WIFI Switch Relay Module
-Installation instructions provided on purchase.Please verify this unit will work with your equipment before you purchase it.
-Power adapter is not included with this! It uses any standard micro usb charger (phone charger) or needs to be powered by an external source (your gate's 12V-24V power supply).